Auto
Test
Workshop Pro User Manual
Page 21
8.
Return of Workshop Pro
Returning the unit should not be necessary under normal operating conditions,
however if there is a problem and it requires shipment the unit please follow the
subsequent protocols
8.1 Packaging
The Workshop Pro should be packaged in the original shipping container. However,
where this container is not available, remember that you are shipping an electronic
instrument. Bubble pack or foam should surround the Workshop Pro and should be
inserted into a sturdy cardboard box.
8.2 Shipping
Labelling -
A label noting “Electronic Device - Fragile” should be placed on the box.
Freight Carrier -
Container should be sent “
Freight Prepaid
”. There is no preference
on freight carriers. However, the unit should be forwarded by companies such as Toll,
Startrack, UPS, or Federal Express if an expedient delivery is required.
8.3 Documentation
A copy of the purchase order for re-calibration and a packing slip must be included
with the shipment. It should note the Purchase Order Number, Date, Serial Number
and the address where the unit should be returned to.
9.
Maintenance and Troubleshooting
Maintaining the Workshop Pro only requires you to charge it as the battery declines.
Under no circumstance should you attempt to open the unit.
If you are in need of troubleshooting and none of the information in this manual is able
to fix the issue or describe the process adequately you should contact your local
Burson Auto Parts Store or find your nearest international distributor:
http://www.autotest.net.au/distributors/
Should you have any further problems, you may contact the AutoTest Service
Department by Phone: (+61 3)88403016
