Auto-Sleepers Broadway FB, Handbook

Page: 77 / 130

9-13
FITTED EQUIPMENT
Set timer 2
Back (Return to main screen)
Start (Set start time)
Stop (Set stop time)
Water (Set water temperature)
Temp (Set room temperature)
The timer settings can be made every day
until the timer is switched off. If the room or
water temperature is changed outside the
timer menu, the timer is automatically
switched off.
Buzzer on/off (select on/off)
Backlight (brightness levels 0-9)
Note: If no action is taken, the display
switches back to the main screen after a few
seconds. The lighting switches off after a
short delay.
Further information
see operating instructions Combi 4E / Combi
6E
Maintenance
Clean the panel with a dry and fluff-free cloth.
Troubleshooting
Fault Rectification / Cause
Clock is not shown Set clock
Activated timer is not shown any more Power supply was interrupted
Room temperature is not shown Heater not active
Device does not react any more Interrupt power supply for 10 seconds
Heater / display does not react Check 12V supply voltage
If these measures do not rectify the problem, please contact the next Truma Service point
(see Truma service book or www.truma.com).