60
Installation
HC-7X NEXSTAR
Docking Station
To wire the docking station, use an unswitched and fused 12 VDC+ power source to ensure remote
charging when the vehicle is off. Connect this power supply to the “Power +” terminal on the dock and
ground the “Power –“ terminal to the vehicle. Terminal 1 and Terminal 2 will be equal when the remote
is not in the docking station. Terminal 2 is used only as a signal and should not be used with any type of
load.
Auto Crane offers a cradle kit, P/N 366823460, that includes a chime that indicates that the remote has
not been returned to its cradle when not in use.
.20 TYP.
4 PLCS.
54
2.126
44
1.732
159
6.26
25.50
1.00
DIMENSIONS FOR REFERENCE
98
3.86
A
DETAIL A