23
NexStar Operation
HC-7X NEXSTAR
Low Remote Battery
The NexStar remote uses a rechargeable, internal lithium-ion battery which is usually charged when the
remote is placed in the docking station that is powered by +12VDC. In the event that the remote battery
has been sufficiently drained, the remote can be recharged by placing it in the docking station, tethering it
to the crane, or using the auxiliary battery pack.
To use the auxiliary battery pack, first install 3 AA alkaline batteries into their respective places, paying
attention to how they should be oriented in the pack. The battery pack can then be slid into place.
Use only alkaline batteries, size AA in the auxiliary battery pack.
If the remote battery has been discharged to the point that the remote turns off,
it may be necessary to allow the remote to charge (docking station, tether, or
battery pack) for a time before wireless use can continue.
If immediate use of a discharged remote is needed, it is recommended to use
the tether connection. This will allow for both use of the transmitter as well as
charging the remote battery.
NOTICE
NOTICE
!
CAUTION