Auto Crane HC-10 NEXSTAR, Owner'S Manual, Page: 31 / 92

31
NexStar Operation
* Although the power switch maybe in the “On” position, it does not necessarily mean that there is
communication between the remote and the crane. The remote goes to sleep after a certain amount of
time. If the remote goes to sleep, it can be “woken up” by depressing the trigger, or moving either joystick
in any direction.
HC-10 NEXSTAR
Remote Layout
DIRECTION FUNCTION GRAPHIC DESCRIPTION
Up Engine Start Sends a 12 VDC+ signal to start vehicle
Down Engine Stop Sends a 12 VDC+ signal to stop vehicle
Up Boom Up
Moving the joystick up activates boom up
function
Down Boom Down
Moving the joystick down activates boom down
function
Left Rotate CCW
Moving the joystick to the left activates
counterclockwise rotation function
Right Rotate CW
Moving the joystick to the right activates
clockwise rotation function
Up Hoist Up
Moving the joystick up activates hoist up
function
Down Hoist Down
Moving the joystick down activates hoist down
function
Left Boom Retract
Moving the joystick to the left activates boom
retract function
Right Boom Extend
Moving the joystick to the right activates boom
extend function
Up Auxiliary
Sends a signal that activates an auxiliary
output to operate an external component
Down High Idle
Sends a signal that activates High Idle on the
vehicle
Up On Turns remote on*
Down Off Turns remote off