18
NexStar Operation
HC-10 NEXSTAR
Display Screen Layout
1.
Load Ribbon
- Displays current crane load as a percentage of total capacity. Ribbon will be green
between 0% and 90% capacity. The value displayed when the crane is unloaded may be higher than
0% due to the weight of the boom.
2.
90% Load
- Between 90% and 100% load ribbon will display yellow indicating crane is nearing full
capacity.
3.
100% Load
- Will display red if load meets or exceeds 100% of crane capacity.
4.
Info-Box
- Will display green with text upon start-up. Once the Horn/Start button has been pressed
and remote is linked with receiver, it will display green with no text. Any alarms or warnings will be
displayed here. Box will be red with no text if there is no link between the remote and receiver.
5.
Speed Setting
- Displays current maximum crane operation speed setting.
6.
Transmitter Icon
- Will have line through if no link is present. Will display cord if remote is tethered.
7.
Battery Level
- Will display remaining transmitter battery in increments of 25%.
8.
Joystick Mode
- Displays current control configuration selected.
9.
High Idle/Aux
- Displays respective icon if High Idle and/or Aux has been activated.
10.
Boom Angle
- Displays the current boom angle in degrees.
1
3
2
5
10
4
6
7
8
9