46
4.7.2.7
Vehicle Status
This item is used to check the current condition of the vehicle, including communication
protocols of OBDII modules, retrieved codes amount, status of the Malfunction Indicator
Light (MIL), and other additional information.
4.8 Exiting Diagnostics
The Diagnostics application remains open as long as there is an active communication
with the vehicle. You must exit the diagnostics operation interface to stop all
communications with the vehicle before closing the Diagnostics application.
NOTE
Damage to the vehicle electronic control module (ECM) may occur if communication is
disrupted. Make sure all connections, such as USB cable and wireless connection, are
properly connected at all times during testing. Exit all tests before disconnecting the test
connection or powering down the tool.
To exit the Diagnostics application
Now, the Diagnostics application is no longer communicating with the vehicle and it is
safe to open other OTOFIX applications, or exit the OTOFIX diagnostics system and
return to the Home screen.
Summary of Contents for OTOFIX D1 Pro
