65
Figure 4-35
Sample Read Codes Screen
4.13 Exit Diagnostics
The Diagnostics application operates while communication between the tablet and the
vehicle is still active. It is important to properly exit from the diagnostics operation interface
to stop all communications with the vehicle before closing the Diagnostics application.
NOTE
Damage to the vehicle electronic control module (ECM) may occur if communication is
disrupted. Ensure all forms of communication links such as data cable, USB cable, and
wireless or wired network, are properly connected throughout the test. Exit all interfaces
before disconnecting the test cable and power supply.
To exit the Diagnostics application
1. On an active diagnostic screen, tap the
Back
or
ESC
button to exit a diagnostic
session, or tap
Vehicle Swap
button in the diagnostics toolbar to return to the
Vehicle Menu screen.
2. On the
Vehicle Menu
screen, tap the
Home
button in the top toolbar, or tap the
Back
button in the navigation bar at the bottom of the screen, or tap the
Home
button in the diagnostics toolbar to exit the application directly and return to the
MaxiSys Job Menu.
Now, the Diagnostics application is no longer communicating with the vehicle and it is safe
to open other MaxiSys applications or exit the MaxiSys Diagnostics System and return to
the Home screen.
