99
9.6 ADAS Settings
Advanced Driver Assistance Systems (ADAS) is an array of vehicle systems that aid the
driver either through passive alerts or by active control of the vehicle to drive safer and
with greater awareness and precision.
MaxiSys MS909CV is bound to the main frame when it leaves the factory, and you can
configure related settings through the following steps:
To adjust the ADAS setting
1. Tap the
Settings
application on the MaxiSys Job Menu.
2. Select
ADAS settings
on the left column.
3. Follow the on-screen instructions to complete the settings.
9.7 Vehicle List
This option allows you to sort the vehicles either by alphabetic order or by frequency of
use.
To adjust the vehicle list setting
1. Tap the
Settings
application on the MaxiSys Job Menu.
2. Select
Vehicle list
on the left column.
3. Select the required sort type. A check mark will display to the right of the selected
language.
4. Tap the
Home
button on the top-left corner to return to the MaxiSys Job Menu, or
select another setting option for system setup.
9.8 Battery Test
To adjust the battery test setting
1. Tap the
Settings
application on the MaxiSys Job Menu.
2. Select
Battery test
on the left column.
3. Switch on
Current clamp
and then you can measure the current when doing the
battery test; switch on
Visual inspection
to access the visual inspection when
doing the battery test.
4. Tap the
Home
button in the top left corner to return to the MaxiSys Job Menu. Or
select another setting option for system setup.
