82
11
VCI Manager
This application allows you to pair up the tablet with the VCI device, either the J2534
Programming Device or the Wireless Diagnostic Interface, and to check the
communication status.
Figure 11-1
Sample VCI Manager Screen
1.
Connection Mode
– there are two connection modes available for selection. The
connection state is displayed alongside.
BT Paring
– when paired to a wireless device, the connection state displays as
Paired; otherwise it displays as Unpaired.
Update (for VCI software only)
– update VCI software via internet through the
MaxiSys tablet networking using USB connection.
Select a connection mode to manage and set up connection.
2.
Settings
– this section allows you to manage wireless pairing or set up network
connection.
BT Setting
– searches and displays the type and a partial serial number for all
of the devices available for pairing. Tap a required device to start pairing. The
BT status icon displayed to the left of the device name indicates the received
signal strength.
Ethernet Setting
– allows you to perform network configuration.