Diagnostics Operations
Diagnosis
34
To erase codes
1. Tap
Erase Codes
from the Function Menu.
2. A warning message displays to inform you of data loss when this
function is applied.
a) Tap
Yes
to continue. A confirming screen displays when the
operation is successfully done.
b) Tap
No
to exit.
3. Tap
ESC
on the confirming screen to exit Erase Codes.
4. Check the Read Codes function again to ensure the operation is
successful.
4.6.4 Live Data
When this function is selected, the screen displays the data list for the
selected module. The items available for any control module vary from one
vehicle to another. The parameters display in the order that they are
transmitted by the ECM, so expect variation between vehicles.
Gesture scrolling allows you to quickly move through the data list. Simply
touch the screen and drag your finger up or down to reposition the parameters
being displayed if the data covers more than one screen. The figure below
shows a typical Live Data screen:
Figure 4-10
Sample Live Data Screen
