Autel MaxiSys ADAS, Manual, Page: 88 / 136

81
9
VCI Manager
This application allows you to pair the tablet with the VCI device, MaxiFlash
Elite, and to check the communication status.
Figure 9-1 Sample VCI Manager Screen
1. Connection Mode
– there are two connection modes available for
selection. The connection state is displayed alongside.

BT Pairing
– when paired to a wireless device, the connection state
displays as Paired; otherwise it displays as Unpaired.

Update (for VCI software only)
– updates VCI software via Internet through
the MaxiSys tablet networking using USB connection.

Select a connection mode to manage and set up connection.
2. Settings
– this section allows you to manage wireless pairing or set up
network connection.

BT Setting
– searches and displays the type and part serial number for all
of the devices available for pairing. Tap a required device to start pairing.
The BT status icon displayed to the left of the device name indicates the
received signal strength.

Ethernet Setting
– allows you to perform network configuration.