37
before the data recording start point for reference (for Auto trigger
mode only)
To perform setting for live data record
1.
Tap the
Setting
functional button at the bottom of the Live Data
screen.
2.
Tap the
Record
navigation button.
3.
Tap the
○
>
button on the right of
Trigger Type
bar and select the
required trigger mode.
4.
Tap the
○
>
button on the right of
Duration
bar and select a length
of time.
5.
Tap the
○
>
button on the right of
Trigger Point
bar and select a
relative percentage of a record length to be reserved before the data
recording start point.
6.
Tap
Done
to save the setting and return to the Live Data screen; or
tap
Cancel
to cancel without saving and exit Setting.
Done Button
- confirms and saves the setting, and returns you to the
Live Data screen.
Cancel Button
– cancels the setting operation, and returns you to the
Live Data screen.
Generic OBD II Operations
A fast-access option for OBD II/EOBD vehicle diagnosis is available on the
Vehicle Menu screen. This option presents a quick way to check for DTCs,
isolate the cause of an illuminated malfunction indicator lamp (MIL), check
monitor status prior to emissions certification testing, verify repairs, and
perform a number of other services that are emissions-related. The OBD
direct access option is also used for testing OBD II/EOBD compliant vehicles
that are not included in the Diagnostics database.
Functions of the diagnostics toolbar buttons at the top of the screen are the
same as those available for specific vehicle diagnostics. See
on page 21 for details.
