68
NOTE
1.
Always reset the engine oil life to 100% after every oil change.
2.
All required work must be carried out before the service indicators are reset. Failure to
do so may result in incorrect service values and cause DTCs to be stored by the relevant
control module.
3.
For some vehicles, the scan tool can reset additional service lights such as the
maintenance cycle and service interval. On BMW vehicles for example, service resets
include engine oil, spark plugs, front/rear brakes, coolant, particle filter, brake fluid, micro
filter, vehicle inspection, exhaust emissions inspection, and vehicle checks.
10.2 Electric Parking Brake (EPB) Service
This function has a multitude of ways to maintain the electronic braking system including
activating and deactivating the brake control system, assisting with brake fluid control, opening
and closing brake pads, and calibrating brakes after disc or pad replacement.
EPB Safety
It can be dangerous to perform EPB system maintenance.
Before you begin the service work, please keep the following rules in mind!
Ensure that you are familiar with the braking system and its operation before
commencing any work.
The EPB control system may require deactivation before carrying out any
maintenance/diagnostic work on the brake system. This can be done from the tool menu.
Only perform maintenance work when the vehicle is stationary and on level ground.
Ensure that the EPB control system is reactivated after the maintenance work has been
completed.
NOTE
Autel accepts no responsibility for any accident or injury arising from the maintenance of the
EPB system.
10.3 Tire Pressure Monitoring System (TPMS) Service
This function allows you to quickly look up the tire sensor IDs from the vehicle's ECU and to
perform TPMS replacement and reset procedures after tire sensors are replaced.
10.4 Battery Management System (BMS) Service
The BMS allows the tool to evaluate the battery charge state, monitor the closed-circuit current,
register the battery replacement, activate the
rest state of the vehicle, and charge the battery
via the diagnostic socket.