27
3. Landing Feature
Landing Protection
When the aircraft arrives above the home point, this feature will detect the ground
environment below. If the ground is flat, the aircraft will land automatically.
Otherwise, it will hover and wait for the next instruction.
Accurate Landing
When this feature is activated, the aircraft will land as close to the takeoff point.
Important
The aircraft will record the takeoff point as the default home point. The
accurate landing only takes effect when the home point is not updated during
the flight.
Select an open area with sufficient light as the takeoff point.
To use this feature, make sure that the environment where the aircraft takes off
is not changed.
Landing protection and accurate landing features can be enabled using the
App.
2.1.7 Omnidirectional Binocular Vision
Sensing System
The binocular vision sensing systems on the front, rear, left, right, top, and bottom
of EVO Ⅱ Dual 640T V3 use image data to calculate the distance between the
aircraft and potential obstacles. Once an obstacle is detected, the system will stop
the aircraft from flying forwards. The binocular vision systems on the front, rear,
and bottom are also equipped with a Starpoint positioning system. This system
uses the ultrasonic sensor to calculate the aircraft’s altitude and is combined with
the binocular vision camera to obtain the location information through image
analysis.
Binocular vision sensing system
System
Position on the Aircraft
Obstacle Sensing Range
Front
Front of the aircraft
0.5 to 18 m
