AUTEC DYNAMIC+P Series, Instruction Manual For The Use And The Maintenance, Page: 40 / 44

LIUPJQ001_eng-00 AUTEC
40
11.3 Identifying the activated command
If the green LED is illuminated, this means that at least one of the commands A1-A8, D2-D20,
H1-H8 and L1-L8 is activated during the Radio Remote Control start up.
You can identify the activated command by observing the long blinks followed by short blinks
emitted by the red LED, as described in the table below.
Green LED
Red LED
2.8” display
Activated
command
Number of long
blinks
Number of
short blinks
On 1 2
Digital active
11 02
D2
On 1 3
Digital active
11 03
D3
On 1 4
Digital active
11 04
D4
On 1 5
Digital active
11 05
D5
On 1 6
Digital active
11 06
D6
On 1 7
Digital active
11 07
D7
On 1 8
Digital active
11 08
D8
On 1 9
Digital active
11 09
D9
On 1 10
Digital active
11 10
D10
On 1 11
Digital active
11 11
D11
On 1 12
Digital active
11 12
D12
On 1 13
Digital active
11 13
D13
On 1 14
Digital active
11 14
D14
On 1 15
Digital active
11 15
D15
On 1 16
Digital active
11 16
D16
On 1 17
Digital active
11 17
D17
On 1 18
Digital active
11 18
D18
On 1 19
Digital active
11 19
D19
On 1 20
Digital active
11 20
D20