Australian Monitor
Contents
Page
1.
Introduction
5
2.
Controls, Connectors and Indicators
6
2.1 Front Panel
7
2.2 Rear Panel
9
3.
Installation
10
4.
Operation
12
5.
Maintenance
14
6.
Warranty
15
7.
Specification
16
List of Illustrations
Page
Figure 1. Block Diagram
5
Figure 2. Front Panel Layout
6
Figure 3. Rear Panel Layout
8
Figure 4. Speaker Connector Wiring
11
1. Introduction
Congratulations on choosing Australian Monitor for
your professional amplification requirements.
The design of your
Synergy
-Series Audio Power
Amplifiers embrace all the aspects of a well designed
unit. The visual design, mechanical, electrical and
sonic parameters, along with our dedicated
manufacturing process, have all been optimized to
provide a professional tool that exhibits quality,
reliability and longevity.
The
Synergy
-Series amplifiers are 2 unit (3.5") tall, 19"
wide rack mountable units.
Each channel of the amplifier comprises a balanced
active input with a buffered attenuator driving a
differential class A drive stage which in turn drives a
fan-cooled, class AB, BJT output stage configured as
an emmiter follower. The unit operates from a high
current-capable linear power supply.
These units have been specifically designed to
deliver their high power output with minimal
distortion, and provide the critical degree of control
required by your speakers, at high duty cycles for
extended periods.
Figure 1 Amplifier Block Diagram
Introduction 5