NETWORK CONFIGURATION
DYNAMIC IP (RECOMMENDED)
The amplifier ships with DHCP client mode enabled by default. This means you can connect your device to a LAN (network) that has
DHCP enabled and an IP address will automatically be allocated for the amplifier. To do this, simply plug the ethernet cable into the rear
of the amplifier to the port labelled “Ethernet” and connect the other end to a router/switch.
Once placed on a DHCP network the amplifier can be accessed via a web browser with the address listed below.
STATIC IP
If a point to point connection is required between the PC and amplifier then a static IP address can be setup in the PC operating
system to connect to the default static IP address of the amplifier:
Default Static IP: 192.168.1.10
Default Static IP Subnet: 255.255.255.0
NETWORK ACCESS
Windows Machine (and any OS that has a NetBIOS client installed and operational):
Supported Browsers: Google Chrome, Firefox
LAN address (via NetBIOS): http://ausmonitor/
OSX (and any OS that has Bonjour installed and operating):
Supported Browsers: Google Chrome, Safari, Firefox
LAN address (via Bonjour (mDNS)): http://ausmonitor.local
ISP SERIES
INSTALLATION AND OPERATION MANUAL
INSTALLATION & SETUP (CONT.)
http://
ausmonitor/
http://
ausmonitor.local
10