PAGE 8
HSP SERIES INSTALLATION AND OPERATION MANUAL
SOFTWARE SETUP
Supported Operating Systems
•
Windows 10
•
Windows 8
•
Windows 7 (32/64 bit)
•
Windows XP (32/64 bit)
Software Download Procedure
1
Navigate to: http://www.australianmonitor.com.au/resources/
Type the product name into the search box as follows (for example):
HS120P
2
Select the latest version of the HSP Control Software Installer VX.X.0
3
Navigate to your downloads folder and double click on the installer to run
4
Plug in a USB/RS232 cable to the HSP power amplifier and turn the
amplifier on
5
Launch the HSP Control Software and connect to the amplifier
Software Control Over USB
1
Turn on the power to the HSP unit by pushing the front panel switch up.
2
Plug in the supplied USB cable to the HSP front panel and PC.
3
Open the software application HSP Control Software VX.X.X.
4
Upon successful connection the main application window will look like
the image below. (Note: The number of channels displayed will depend
on the HSP model):
Software Control Over RS232
The RS232 control port works in two ways
1
As an alternative control port to the front panel USB for longer
distance control using the PC application.
2
To interface to an external control system using serial commands.
i.e. Not using the PC application but directly controlling the unit and
sending discrete commands.
RS232 Connection Setup
TXD
Transmit OUT of amplifier.
Connect to RECEIVE of remote control system
RXD
Receive IN to amplifier.
Connect to TRANSMIT of remote control system
COM Port
Settings
Baud 115200, Data 8, Stop 1, Parity None, Flow None
TXD
RXD
RXD
TXD
GND
GND
USB