PAGE 3
HSP SERIES INSTALLATION AND OPERATION MANUAL
Revision 1.1: Jul 2018
Introduction 3
Features & Protection Features
4
Controls, Connectors and Indicators
5
Software Setup
8
Installation 13
Basic Setup and Operation
16
Maintenance 17
Specifications 18
Serial Command Protocol
22
WARNING!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT & FULLY INSERT.
CAUTION
THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended
to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
For European Union countries: This symbol on
the product or its packaging indicates that this
product must not be disposed of with other waste.
Instead, it is your responsibility to dispose of your
waste equipment by handing it over to a designated
collection point for the recycling of waste electrical
and electronic equipment.
Please contact your local authority for further details
of your nearest designated collection point.
Rating plate and caution marking are marked on the back enclosure of the apparatus
INTRODUCTION AND CONTENTS
Congratulations on choosing Australian Monitor for your professional
amplification requirements.
The design of our HSP series constant voltage power amplifiers
embraces all the aspects of a well-designed amplifier. The visual
design, mechanical, electrical and sonic parameters, along with our
dedicated manufacturing process, have all been optimised to provide a
professional tool that exhibits quality, reliability and longevity.
The HSP series amplifiers are 1 unit 1.75” high, 19” wide, or 2 unit
3.5” high, 19” wide rack mountable units depending on the model.
Models are available in 1, 2 and 4 channel versions. The HSP amplifier
is fully controllable over the included USB and RS232 interface which
provides configuration and monitoring capabilities. An included mini
DSP also allows control of the volume, muting, compressor/limiter and
input channel selection which feeds an efficient Class D amplifier to
deliver 120W or 250W of output power per channel.
These amplifiers have been specifically designed to deliver their high
power output with minimal distortion, and provide the critical degree
of control required by your speakers.
HSP SERIES