13
2.
Intructions for Display Symbols
：
Heating Pool mode
：
Cooling Pool mode
：
Auto run mode
：
Boost run mode
：
Smart run mode
：
Silent run mode
：
Heat Pump output capacity in actual time
：
wifi function
：
Water in Temperature
：
Water out Temperature
：
Error Warning
3.
Instruction for special display
When turn off the heat pump,screen only shows the last running symbol and
data
shows 0. When heat pump has error warning,symbol displays and twinkles, water in area
displays P or
E, water out area
displays Error code.
Instruction for Function
1.
Switch Modes
When heat pump is on,short-press
to switch Heat/Cool/Auto,each mode is available for selecting
Boost/Smart/Silent three modes.
2.
Set Temperature
When heat pump is on,short-press
or
into water temperature setting surface. Water in area
t
emperature value twinkles,press
or
to select value,press
to confirm and exit current setting.No
any set up after 30 seconds,the controller will save the last setting and go back to original surface.
3.
Set Parameter
When heat pump is on,Long-press
into memu,
displays Parameter Query,press
or
select
among Parameter Query/Parameter Setting/Debugging Status/History Fault.Short-press
to confirm your
selction and switch to
,press
or
select,
displays the value.
Summary of Contents for Eco Full Inverter EFI 14
