C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
83
Engine oil: Draining
The oil change should be made when the oil is warm.
WARNING
The engine oil may be very hot. To avoid the risk of burns, do not remove the
drain plug or unscrew the filter if the engine is hot. Wait until the engine oil is
cooler.
- Make sure the forklift is on level ground.
- Remove the dipstick.
- Clean the area around the oil drain plug.
- Place a container below the oil drain plug.
- Unscrew the oil drain plug
(fig. 1)
.
- Allow all the oil to drain from the engine.
- Clean the oil sump drain plug and replace the plug with a new plug.
- Screw on the plug by hand and tighten it.
Oil filter cartridge: Replacing
The oil filter cartridge
(a)
is located on the left-hand side of the engine.
- Unscrew the oil filter cartridge by turning to the left.
- Clean the base of the filter and oil the seal of the new filter element.
- Screw on the new filter element and tighten by hand, without using mechanical
means.
Dispose of the used oil filter cartridge in an authorized centre for this purpose.
(fig. 3 – K
U
B
O
TA
V2403-M)
(fig. 2 - ISUZU 4LE2)
(fig. 1)
a
a
Periodic
Maintenance
Operations