C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
72
Parking the machine and stopping the engine
Make certain that the forklift is parked on level ground when leaving it overnight. Also
park it on level ground before any scheduled maintenance is attempted.
-
Lower the forks to the ground, apply the parking brake and push directional
switch to neutral.
-
Run the engine at idle for 1 minute if the engine has been working at full load
-as this procedure will cool the engine components evenly.
-
Turn off the key switch in a counter-clockwise motion to stop the engine.
-
Remove the key from the ignition and take it with you. Never leave the key
in a parked machine.
Be careful with the environment
At the end of the operating life of the machine, bring it to a recycling center or an scrap-
dealer.
It is absolutely forbidden to leave the materials in public places.
When changing the engine oil or other fluids, use a big collecting trough. Make sure
not to pollute the environment with emerging oil and other waste products (coolant,
batteries, etc.) bring them to the corresponding recycling centre.
In case that substances escape from the machine that are harmful to the environment
and/or to the people, take remedial measures inmediately, (eg.: if hydraulic oil emerges;
apply oil bonding agent, put a collecting vessel underneath, tighten leakage, remove
and dispose of contaminated earth, if required).
At the end of the life cycle of the machine, bring it to the specialised and recognised
recycling centres.
Parking the
machine