C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
55
H- Battery charge warning lamp.
This lamp shows the condition of the battery
and indicates if the battery charge is too low or if the alternator is not charging
properly. Once the engine starts to run, this red lamp turns off If it remains lit, stop
the engine and determine the cause.
I- Engine temperature warning lamp.
This gauge shows the temperature of
the coolant in the engine cooling system. When this lamp glows emits an audible
warning means that the engine is operating at high temperature which could
damage the engine. The engine should be stopped immediately to determine the
cause of the high temperature. It could be low coolant, debris in the radiator or a
thermostat, which does not operate correctly.
J- Transmission fast speed indicator lamp C200H-HI / C200H x4 / C250HI
LE / C250H x4 LE
.
This lamp is lit when the fast speed is selected.
K- High beam indicator lamp (with lighting equipment)
(
)
.
This lamp is lit
when high beams are selected.
L- Turn signal indicator lamp (with lighting equipment)
(
)
.
This lamp will
blink indicating turn signals are operating.
Fuel
The current regulations of exhaust emissions, require that, for the whole life of the
machine, the level on the different components of these emissions, are under the
maximum figures stated on the regulations.
As a consequence of that, the maintenance plan of the engine has to be followed up
carefully, giving special attention to the quality and pureness of the fuel, the cleanliness
of the filters and, in general, to the general maintenance of the fuel circuit.
Handling
- Only use the fuel type authorized by AUSA. Do not use fuel mixed with oil, other
fuels or unsuitable additives.
- The correct fuel for the forklift is diesel. For further details regarding fuel type and
required specifications see the section “Fluids and lubricants”.
- Do not allow the fuel to come into contact with the skin and avoid inhaling the
fumes, which are toxic. High concentrations of fuel vapour may cause sickness,
loss of consciousness or even loss of life in the event of prolonged exposure.
If you experience symptoms such as sickness or loss of consciousness seek
medical advice immediately.
Instrument Panel
and controls