C200H-HI / C200H x4 / C250H-HI
C250HI LE / C250H x4 / C250H x4 LE
54
Multifunction instrument (fig. 1)
A- Hourmeter.
This gauge indicates the total running time of the forklift engine to
enable servicing of the engine at proper intervals. (See
MAINTENANCE CHART
for servicing frequency).
B- Fuel
level.
This gauge indicates the diesel fuel level in the tank.
C- Fuel reserve indicator lamp.
This lights up when the level of fuel in the tank falls
into reserve.
D- Air filter warning lamp.
When the air filter of the diesel engine becomes clogged
with dirt, this lamp will light. The air filter should be immediately cleaned or serviced.
E- Engine pre-heat indicator lamp.
When this lamp glows it indicates that the
engine pre-heat plugs are in operation and heating the combustion chamber the
temperature required to start the engine.
F- Hydraulic oil level warning lamp.
This lights up and emits an audible warning
when the hydraulic oil level is at the minimum level. Oil should be added to top up
the level to the correct level
G- Engine oil pressure warning lamp.
When the ignition is on, this lamp lit and
turns off when the engine is running. If this lamp turns on emits an audible warning
while the engine is running, the engine must be stopped immediately to prevent
damages. Check the level and add oil if necessary.
(fig. 1)
Instrument Panel
and controls