www.auroramm.com
1
USERS GUIDE
Serial Send History:
This window will display sent serial data when serial debug session is running.
Clear:
Click this button to clear the Serial Send History window.
Send String:
Enter a serial string to send via the selected serial port. Click the ‘Send’ button to transmit the message.
ASCII Chart:
Click this button to open an ASCII reference table.
Hex:
Enter a Hexadecimal byte and click the ‘Add’ button. This will convert the Hex code into an ASCII character and
append it to the ‘Send String’ field. If there is no corresponding printable ASCII character, it will add a ‘%’ prefix to
identify the subsequent two characters as a Hex byte.
Decimal:
Enter a decimal value in the range of 0-255 and click the ‘Add’ button. This will convert the decimal code into
an ASCII character and append it to the ‘Send String’ field. If there is no corresponding printable ASCII character, it will
convert the decimal value to a Hex byte and add a ‘%’ prefix to identify the subsequent two characters as a Hex byte.
Firmware Update
The Firmware Update page provides instructions and means of updating
the firmware of the RXT device. Follow the written instructions.
When available, a firmware update file can be obtained directly from
Aurora. The update can be downloaded from the Aurora support portal.
Be sure to note the current firmware version as well as the version of the
firmware update file to ensure compatibility. The current firmware
version can be found in the
page.
Once a firmware update file has been obtained, upload it to the device
using FTP. More information about connecting to an RXT device via FTP
can be found in the
Update Firmware:
Click this button after reading and executing the written instructions to update the firmware of the
RXT device.