27
User Guide
Device Settings
There are six tabs to choose from each one containing various setup features. At the top bar of the
window is the Host Name and the MAC Address of the unit.
The General tab consists of the following:
Unit Locator
–
When set to blink the SFP TX/RX LEDs for the unit will both blink in sync at a
rapid rate. This allows to find a unit by the front panel rather than looking at the printed MAC
Address label on the unit.
Temperature
–
Processor Temperature
Auto Sense
–
Allows the HDMI inputs to change automatically based on last signal applied.
Front Panel Lock
–
When enabled the front buttons will be disabled.
WebServer Info
–
View device MAC address and serial number.
