6
User Guide
HARDWARE INSTALLATION
1.
If rack mounted install the 2 rack mount ears for 19” 1RU rack mounting.
2.
Insert SFP+ module(s) into the IPX-FSW 10G network switch. Generic is the recommended type in
single or multi-mode.
3.
Connect fiber to each port accordingly as well as any RJ-45 1G port.
4.
Connect power cable and unit is ready to go.
5.
Don’t forget to setup the IPX-FSW as required with the integrated web setup pages.
Note: Go to
for latest user manual. Customer portal access is required for the latest
firmware and CLI (Command Line Interface) manual.
