Aurora Design SCRF-525MSC, Quick Start Manual

Page: 1 / 2

Aurora Design SCRF-525M-SC Standards Converter
525/30i (NTSC) to 525/30i sequential color with System M modulator.
(Positive video, FM audio, audio carrier level -12db)
Selector Channel Video Audio
Position Assignment Frequency Frequency
0 Disabled
1 1 45.25 MHz 49.75 MHz
2 2 55.25 MHz 59.75 MHz
3 3 61.25 MHz 65.75 MHz
4 4 67.25 MHz 71.75 MHz
5 5 77.25 MHz 81.75 MHz
6 6 83.25 MHz 87.75 MHz
7 7 175.25 MHz 179.75 MHz
8 8 181.25 MHz 185.75 MHz
9 9 187.25 MHz 191.75 MHz
A 10 193.25 MHz 197.75 MHz
B 11 199.25 MHz 203.75 MHz
C 12 205.25 MHz 209.75 MHz
D 13 211.25 MHz 215.75 MHz
E 14 471.25 MHz 475.75 MHz
F 15 477.25 MHz 481.75 MHz
Selector Position Option Function
0 Converter Enable/Bypass Mode
1 Sleep Mode
2 Default Audio Tone
3 RBG/RGB Sequence
4 Color Select
5 +33% Chroma Gain
Note: To change an Option Setting, depress the Option Button for 1
second to enter the Option Setting Mode. Turn the Selector Switch to the
desired position. The Status LED will blink Green for enabled, Red for
disabled, and Yellow for not supported. Momentarily press the Option
Button to toggle the setting. When finished, depress the Option Button for
1 second to exit the Option Setting Mode. Note: the Option Setting Mode
will automatically exit if no changes are made for 1 minute.
www.tech-retro.com v4.0
Aurora Design SCRF-525M-SC Standards Converter
525/30i (NTSC) to 525/30i sequential color with System M modulator.
(Positive video, FM audio, audio carrier level -12db)
Selector Channel Video Audio
Position Assignment Frequency Frequency
0 Disabled
1 1 45.25 MHz 49.75 MHz
2 2 55.25 MHz 59.75 MHz
3 3 61.25 MHz 65.75 MHz
4 4 67.25 MHz 71.75 MHz
5 5 77.25 MHz 81.75 MHz
6 6 83.25 MHz 87.75 MHz
7 7 175.25 MHz 179.75 MHz
8 8 181.25 MHz 185.75 MHz
9 9 187.25 MHz 191.75 MHz
A 10 193.25 MHz 197.75 MHz
B 11 199.25 MHz 203.75 MHz
C 12 205.25 MHz 209.75 MHz
D 13 211.25 MHz 215.75 MHz
E 14 471.25 MHz 475.75 MHz
F 15 477.25 MHz 481.75 MHz
Selector Position Option Function
0 Converter Enable/Bypass Mode
1 Sleep Mode
2 Default Audio Tone
3 RBG/RGB Sequence
4 Color Select
5 +33% Chroma Gain
Note: To change an Option Setting, depress the Option Button for 1
second to enter the Option Setting Mode. Turn the Selector Switch to the
desired position. The Status LED will blink Green for enabled, Red for
disabled, and Yellow for not supported. Momentarily press the Option
Button to toggle the setting. When finished, depress the Option Button for
1 second to exit the Option Setting Mode. Note: the Option Setting Mode
will automatically exit if no changes are made for 1 minute.
www.tech-retro.com v4.0