Aurora Design
FMR-2
User Installation and
Operation Manual
Your radio Configuration:
☐
Tone Control - Original
☐
Tone Control - External control
☐
Tone Control - Using tone switch and volume control
☐
Balance Control - Original
☐
Balance Control - External control
☐
Balance Control - Virtual
☐
Fader Control - Original
☐
Fader Control - External control
☐
Fader Control - Virtual
☐
AM/FM switching - Original
☐
AM/FM switching - Power cycling
☐
Aux Input selection - Tune to left side of dial
☐
Aux Input selection - Signal sensing (VOX)
☐
Aux Input selection - Power cycling
☐
Aux input selection - External switch
☐
American channels
☐
Worldwide channels
☐
Japanese channels
☐
LED - Not Installed
☐
RGB LED - AM/red FM/yellow Aux/green BT/blue USB/magenta
☐
Bi-color LED - AM/red FM/yellow Aux/green BT-USB/orange
☐
Tube Emulation Mode
☐
Automatic Volume Control
☐
Power - 12V negative ground, fused @ 12.5A max
☐
Power - 12V positive ground, fused @ 8A max
☐
Power - 6V negative ground, fused @ 12.5A max
☐
Power - 6V positive ground, fused @ 8A max
☐
Original Power lead
☐
Red wire in cable harness
☐
Original Dial lamp lead
☐
Orange Dial lamp wire in cable harness
☐
Dial lamp comes on with radio
!
!
2