Print on Matte Material
Folding Diagram
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFS TO:
[email protected] .com
FOR APPROVAL BEFORE
FINAL PRODUCTION.
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL
OF PROOFS!
Compact X-Style Piano Bench
PBS-XS
Owner’s Manual
GG1
6
5
PBS-XS
PBS-XS
Owner’s Manual
Owner’s Manual
Specifications
Height:
18.75” – 20.75”
(47.6 – 52.7 cm)
Width:
12”
(30.5 cm)
Length:
24”
(61 cm)
Weight:
8.25 lbs.
(3.74 kg)
Seat size:
17” × 12”
(42.2 × 30.5 cm)
Cushion depth:
2”
(5.1 cm)
Weight Capacity:
Up to 200 lbs.
(90.7 kg)
This AURAY product is warranted to the original purchaser to be
free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original purchase
date or thirty (30) days after replacement, whichever occurs later.
The warranty provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of
this product in its intended manner and in its intended environment.
Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of
equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Auray Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Auray along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.aurayaudio.
com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
AURAY is a registered trademark of the Gradus Group.
© 2014 Gradus Group LLC. All Rights Reserved.
One-Year Limited Warranty
Introduction
Thank you for choosing the Auray PBS-XS Piano Bench.
This X-style, foldable, lightweight piano bench is a sturdy
and durable solution for keyboard players at home, in the
studio, or on the go. It adjusts to three height positions in
one-inch increments, and the 2-inch leather seat provides
comfort through many hours at the keyboard. The X-style
construction allows the PBS-XS to fold flat for easy storage
or travel and assures easy setup.
!
Warnings
Instructions
Setup
1. Place the piano bench upside
down on a stable surface.
2. Place the crossbeam of the
non-attached leg into the
C-brackets
1
and tighten the
two locking knobs.
2
3. Stand the bench upright and
place it on a flat surface.
Adjusting the height
1. Unscrew the threaded knob
and remove the carriage bolt
and washers.
2. Align the two corresponding
holes of the two legs at the
desired height and hold the
washer between them.
3. Insert the carriage bolt into the
square hole of the leg, through
the washer and corresponding
hole of the other leg. Make
sure the carriage bolt is fully
inserted and that the head of
the bolt is flush against the leg.
3
4. Attach the washer and threaded knob to the end of the
bolt and securely tighten.
Note:
The holes of each leg must correspond. If they don’t, the
bench will not be level.
3
2
1
C brackets (2)
1
Locking knobs (2)
2
Threaded knob
3
Carriage bolt
4
Washers (2)
5
Overview
3
5
4
1
2
3
4
2
PBS-XS
PBS-XS
PBS-XS
Owner’s Manual
Owner’s Manual
Owner’s Manual
This product has been tilt-stability tested. Auray is not
responsible for injury due to improper use. Bench must be on a
level surface with all legs touching the surface at the same time.
•
Please read and follow these instructions, and keep this
manual in a safe place.
•
Make sure that this product is intact and that there are
no missing parts.
•
Make sure all parts are secure before using.
•
All photos are for illustrative purposes only.
