Roominator Performance Series
™
USER GUIDE
Auralex
®
Acoustics, Inc.
1-800-959-3343 / 317-842-2600 / Auralex.com
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
EACH KIT INCLUDES:
INSTALLATION:
Project
➋
™
(24) 2’x2’x2” Studiofoam
®
Wedge
(8) LENRD
®
Bass Traps
(144) EZ-Stick Pro
™
Tabs
Deluxe Plus
™
(24) 2’x2’x2” Studiofoam
®
Wedge
(8) LENRD
®
Bass Traps
(6) T’Fusor
™
Diffusors
(168) EZ-Stick Pro
™
Tabs
Pro Plus
™
(36) 2’x2’x2” Studiofoam
®
Wedge
(12) LENRD
®
Bass Traps
(8) T’Fusor
™
Diffusors
(248) EZ-Stick Pro
™
Tabs
STUDIOFOAM
®
WEDGE
T’FUSOR
™
LENRD
®
BASS TRAP
EZ-STICK PRO
™
Studiofoam Wedge, LENRD Bass Traps
and
T’Fusor Diffusors
can be
mounted to standard drywall with the included
EZ-Stick Pro Tabs
. Be advised
that the
EZ-Stick Pro Tabs
are designed for permanent installations and will
damage drywall and painted surfaces when removed.
Mark the target position on your wall or ceiling where the product will be
mounted using small pencil marks, pieces of masking tape or any similar
non marring method. Be sure the surface where the
EZ-Stick Pro Tabs
will
adhere is free of dirt, dust or other oily contaminants by spot cleaning with
rubbing alcohol.
Each
Studiofoam Wedge
panel and
T'Fusor Diffusor
use 4
EZ-Stick Pro
Tabs
, each
LENRD Bass Trap
uses 6 tabs.
Remove one of the release layers on the
EZ-Stick Pro Tabs
and affix it to the
rear side of the
Studiofoam Wedge
perimeter, usually near the corners. On
LENRDs
, place the tabs along the thin edge as shown below. For all
Studiofoam
products, apply very firm pressure for 30 seconds in order to ensure the
EZ-Stick Pro Tabs
properly adhere to the
Studiofoam
.
Not using adequate
pressure will cause the
EZ-Stick Pro Tabs
to fail.
Remove the second layer of the release paper from each of the
EZ-Stick Pro
Tabs
, carefully orient the panels position prior to contact with the wall, then
press in place with firm pressure for 30 seconds.
99
0-
41
3.
Ro
om
in
at
or
s P
er
fo
rm
an
ce S
er
ie
s U
se
r G
ui
de
.in
dd (
10
/2
0/
20
14 - 2
:4
0 P
M
)
LENRD
®
(EZ-Stick Pro Tab Placement)
FINAL APPLICATION AFTER APPLYING FIRM PRESSURE
INITIAL APPLICATION
(Without Applying Firm Pressure)
ADHESIVE
ADHESIVE
