!
!
Warranty claims require proper and profes-
sional assembly, installation and maintenance
in accordance with national regulations and
manufacturer‘s instructions of the drives.
The safety instructions in the supplied pro-
duct documentation are to be observed.
Strictly observe the information given in this
and in the instructions for installation of
drives when mounting the
USKM
.
Details can be found on our website
www.aumueller-gmbh.de
Keep this instruction over the lifetime of the
product.
USKM (Control module)
24V
• The control module
USKM
allows up to 3 drives
respectively locking drives to be connected.
• The
USKM
is confi gurable - via
DIP
switches - as:
-
multiple control module
with up to 3 drives or
-
sequential control module
with up to 2 locking
drives.
• The control module
USKM
has a
post cycle locking
.
• The control module
USKM
has a
cut-off current
surveillance
.
• The cut-off current of the connected drives - is individually
adjustable for each drive - via
DIP
switch.
• A
LED
indicates status and error messages.
• Several control modules
USKM
can be connected in a
line. The maximum output current of the control unit or
the motor line must not be exceeded.
Assembly and Commissioning Instructions
USKM (Control module)
Rated voltage:
24V DC +/- 20%, (max. 2 Vss)
Close circiut current:
< 50 mA
Connections:
max. 3 drives; s < 300 mm
Rated current per drive:
max. 2,5 A
Drive type:
S1, S2, S3, FV1, OFV1
Protection rating:
IP54
Ambient temperature range: min. - 5 °C ... + 70 °C
Surf. mount. plastic housing: 110 x 110 x 66 mm
Feature / Equipment:
DIP switches for settings,
connection terminals: 2,5 mm².
Part.-No.:
512140
Application
:
Control module with 3 outputs and individual settuble cut-off
current, monitored motion run, delayed sequence control.
Functions:
external load dependent cut-off switch (max. 1,25 A),
motion-monitoring up to 3 drives / locking drives,
max. 2 sequential controls.
