!
!
Warranty claims require proper and profes-
sional assembly, installation and maintenance
in accordance with national regulations and
manufacturer‘s instructions of the drives.
The safety instructions in the supplied pro-
duct documentation are to be observed.
Strictly observe the information given in this
and in the instructions for installation of
the drives when parameterize the
A
UMÜLLER
-
drives with
UniPC
.
Details can be found on our website
www.aumueller-gmbh.de
Keep this instruction over the lifetime of the
product.
UniPC
(Drive Parameterisation)
Assembly and Commissioning Instructions
UniPC
(Drive Parameterisation)
UniPC
(Drive Parameterisation):
•
UniPC
is a parameter assigment software
A
UMÜLLER
drives - with the necessary hardware (ParInt). With
this program, a variety of
A
UMÜLLER
productes can be
confi
gured.
• For each product, a separate „plugin“ is available.
• Each plugin confi gures and controls other drives.
• Confi gurable drives:
S12
,
S12 V.2
,
S3
Part.-No.:
524178
Application
:
Hard- and software for the confi guration of drives
produced
by
Aumüller
A
UMÜLLER
A
UMATIC
G
MB
H
.
Rated voltage:
24 V DC +/-20 %
Confi gurable drives:
24 V DC in version S12, S12 V.2, S3
230
V
AC
in
version
S12,
S12
V.2
Connections:
3x Pluggable screw terminals 1,0 mm²
1x
USB
Port
Package contents:
1x Software UniPC (Download link)
http://www.aumueller-gmbh.de/Downloads
1x
Interface
“ParInt”
1x
USB
cable
1x
Connection
cable
Feature / Equipment:
Power supply 24 V DC not included!
N
OTE
Power supply 24 V DC not included!
The power supply 24 V DC of a
control unit
or
test equipment
(Part.-
No.: 533981) can be used!
