Figure 44: Change user level
7.3.2.
Change passwords
Passwords may only be changed as of user level
Specialist (4)
or higher.
The top line in the display indicates the currently selected user level, e.g.
Specialist
(4)
:
Figure 45: Example: User level 4
Only the passwords of same or lower access level may be changed.
Information
Local actuator settings are made using the Combi-Switch.
●
Operate the yellow shuttle dial
of the Combi-Switch to scroll within the menu
.
●
Operate the black selector switch
(outer ring), either to confirm the selected
menu or to go one step back (ESC).
How to proceed
1.
Open device menu.
Information: If the ID of the indicated page starts with
M, PRM, ...
, you have
already entered the device menu. For further information, refer to:
➭
2.
Set user level 4 or higher:
➭
3.
Select menu
Change passwords M0229
.
Device configuration M0053
Service functions M0222
Change passwords M0229
4.
Select user level 1, 2, 3, 4, 5, or 6 using
.
Figure 46: Example of user level 4
5.
Confirm with (Enter).
6.
Enter current password when
Password 0*****
is displayed.
7.
Enter the new password when
Password (new) 0*****
is displayed.
8.
Select next user level with
or abort the procedure via ESC (Escape).
7.4.
Language change in the display
Information
Local actuator settings are made using the Combi-Switch.
●
Operate the yellow shuttle dial
of the Combi-Switch to scroll within the menu
.
●
Operate the black selector switch
(outer ring), either to confirm the selected
menu or to go one step back (ESC).
38
TR-M30X – TR-M1000X
Menu navigation
TR-MR30X – TR-MR1000X
