2.
Short description
Part-turn actuator
Definition in compliance with EN 15714-2/EN ISO 5211:
A part-turn actuator is an actuator which transmits a torque to the valve for less than
one full revolution. It need not be capable of withstanding thrust.
AUMA part-turn actuator
Figure 1: AUMA part-turn actuator SGM 07.1
[1]
Integral controls
[2]
Local controls
[3]
Crank handle (or handwheel)
AUMA part-turn actuators are driven by an electric motor. For control in motor
operation and for processing the actuator signals, controls are integrated within the
housing. Local controls allow for local actuator operation. A handwheel or crank is
provided for manual operation. Manual operation is possible without change-over.
The swing angle is limited by internal end stops. Switching off in end positions may
be either by limit or torque seating.
Software
Using the AUMA CDT software for Windows-based computers (notebooks or tablets),
actuator data can be uploaded and read, settings can be modified and stored. Further
information
➭
page 39, AUMA CDT software (accessories)
With the AUMA Cloud, we provide an interactive platform to collect and assess e.g.
detailed device data of all actuators within a plant.
AUMA Cloud
The AUMA Cloud is the driving element of the digital AUMA world, acting as
interactive platform for efficient maintenance of AUMA actuators at moderate cost.
The AUMA Cloud collects all device data of all actuators within one site and provides
a clear overview at a glance. Detailed analysis provides valuable information on
potential maintenance requirements. Additional functions foster smooth asset
management.
6
SGM 04.1 – SGM 14.1 / SGMR 04.1 – SGMR 14.1
Short description
Profibus DP
