2.
Short description
Part-turn actuator
Definition in compliance with EN 15714-2/EN ISO 5211:
A part-turn actuator is an actuator which transmits a torque to the valve for less than
one full revolution. It need not be capable of withstanding thrust.
AUMA part-turn actuator
Figure 1: AUMA SG 05.2 part-turn actuator with MEC 03.1
[1]
Part-turn actuator
[2]
Crank handle/handwheel
[3]
Actuator controls
AUMA part-turn actuators SG 05.2 - SG 10.2 [1] are part-turn actuators for the
automation of butterfly and ball valves and are driven by an electric motor. For manual
operation, a crank handle [2] or a handwheel is provided. Manual operation is possible
without change-over. In end position OPEN, the limitation of travel is implemented
via end position sensors. In end position CLOSED, the actuator is switched off via
torque seating (excess current measuring) or via end position sensors. AUMA actuator
controls of the MEC [3] are required to operate or process the actuator signals.
Software
Using the AUMA CDT software for Windows-based computers (notebooks or tablets),
actuator data can be uploaded and read, settings can be modified and stored. With
the AUMA Cloud , we provide an interactive platform to collect and assess e.g.
detailed device data of all actuators within a plant.
AUMA CDT
AUMA CDT is a user-friendly setting and operation program for AUMA actuators.
1)
Connection between computer (notebook, tablet) and actuator is made via a cable
which is connected to the MEC 03.1 actuator controls.
AUMA CDT software can be downloaded free of charge from our website
www.auma.com.
AUMA Cloud
The AUMA Cloud is the driving element of the digital AUMA world, acting as
interactive platform for efficient maintenance of AUMA actuators at moderate cost.
The AUMA Cloud collects all device data of all actuators within one site and provides
a clear overview at a glance. Detailed analysis provides valuable information on
potential maintenance requirements. Additional functions foster smooth asset
management.
1)
For the supported actuator ranges, refer to our website.
6
SG 04.2 – SG 10.2
Short description
with actuator controls MEC 03.1
