11.
Signals (output signals)
11.1.
Status signals (output signals)
Up to 4 programmable semi-conductors or relay outputs are available, each with
max. 30 V/1 A switching power.
Table 16:
Exemplary assignment of 4 outputs
Designation of output contact in AUMA CDT software
Designation of output contacts in wiring dia-
gram
Signal DOUT 2
=
End position OPEN
K 1 = End position OPEN
Signal DOUT 1
=
End position CLOSED
K 2 = End position CLOSED
Signal DOUT 3
=
Fault
K 3 = Fault
Signal DOUT 4
=
Selector sw. REMOTE
K 4 = REMOTE
(only for version with local controls)
39
SG 04.2 – SG 10.2
with actuator controls MEC 03.1
Signals (output signals)
