AUMA SA 25.1, Operation Instructions Manual, Page: 16 / 48

Figure 12: Connection arrangement for size 48.1
[1] AUMA plug/socket connector for control connections
[2] Motor connection compartment
Table 3: Cross sections and tightening torques for motor terminals
Tightening torques Cross sections Output speed Type
2.0 Nm 0.5 – 16 mm
2
4 – 22 SA 25.1
SAR 25.1
3.5 Nm 2.5 – 35 mm
2
32 – 90
1.2 – 2.4 Nm 4 – 16 mm
2
4 – 22 SA 30.1
SAR 30.1
4.0 – 5.0 Nm 10 – 35 mm
2
32 – 45
6.0 – 12 Nm 16 – 70 mm
2
63 – 90
1.2 – 2.4 Nm 4 – 16 mm
2
4 – 5.6 SA 35.1
4.0 – 5.0 Nm 10 – 35 mm
2
8 – 22
6.0 – 12 Nm 16 – 70 mm
2
32 – 45
4.0 – 5.0 Nm 10 – 35 mm
2
4 – 11 SA 40.1
6.0 – 12 Nm 16 – 70 mm
2
16 – 32
4.0 – 5.0 Nm 10 – 35 mm
2
4 SA 48.1
6.0 – 12 Nm 16 – 70 mm
2
5.6 – 16
5.3 Connection with AUMA plug/socket connector
Cross sections AUMA plug/socket connector:
●
Power terminals (U1, V1, W1, U2, V2, W2): max. 6 mm² flexible/10 mm² solid
●
PE connection : max. 6 mm² flexible/10 mm² solid
●
Control contacts (1 to 50): max. 2.5 mm²
16
SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
Electrical connection