Features and functions
●
Switch-off mode adjustable:
Limit or torque seating for end positions OPEN and CLOSED
●
Torque monitoring across the whole travel
●
Torque by-pass
●
Programmable EMERGENCY behaviour
-
Digital input low active,
-
Reaction can be selected: Stop, run to end position CLOSED, run to end position
OPEN
●
Speed control
-
Ramps
-
Program operation profiles
-
Program either specific speed for OPEN and CLOSE operations or one digital input
Standard:
Functions (actuators with I/O inter-
face)
●
Positioner
-
Position setpoint via analogue input E1 = 0/4 – 20 mA or 0 – 10 V
-
Programmable behaviour on loss of signal
-
Automatic adaptation of dead band (adaptive behaviour selectable)
-
Selection between open-close duty and modulating duty via digital MODE input
Option:
Bluetooth class II chip, with a range of min. 3 m in industrial environments.
Required accessories:
●
AUMA CDT (Commissioning and Diagnostic Tool for Windows-based PC)
●
AUMA Assistant App (Commissioning and Diagnostic Tool for Android and iOS devices)
Bluetooth
Communication interface
Cable entry: 3 x M20x1.5 threads for cable glands.
Inside rail with spring clamp terminals for wire connection.
Electrical connection
Refer to name plate
Wiring diagram (basic version)
With base and lever (option)
Made of spheroidal cast iron with two or three bores for fixing a lever arrangement. Considering the in-
stallation conditions, the lever may be mounted to the output shaft in any desired position.
Swing lever
Two ball joints matching the lever, including lock nuts and two welding nuts, suitable for pipe according
to dimension sheet
Ball joints (option)
Base with four holes for fastening screws
Fixing
52
PF-Q80 – PF-Q600
Technical data
