AUMA GS 315, Manual

Page: 29 / 36

Operation
●
With electric multi-turn actuator, directly or through VZ/GZ primary reduction gearing
●
Input mounting flanges for multi-turn actuator (refer to table page 2)
Motor operation
Available handwheel diameters (according to EN 12570), selection according to output torque:
GS 315 Type
GZ 30.1 – Primary reduction
gearing
2,120.1 1,696:1 848:1 424:1 212:1 53:1 Reduction ratio
400 400 500/830 800 – – Handwheel Ø [mm]
GS 400 Type
GZ 35.1 – Primary reduction
gearing
1,728:1 864:1 432:1 432:1 324:1 216:1 54:1 Reduction ratio
500/630 800 800 – – – – Handwheel Ø [mm]
GS 500 Type
GZ 16.1
+ GZ 40.1
GZ 40.1 –
Primary reduction
gearing
3,328:1 2,340:1 1,664:1 832:1 416:1 52:1 Reduction ratio
500/630 800 800 – – – Handwheel Ø [mm]
Manual operation
●
Handwheel made of aluminium
●
Handwheel with ball handle
Standard:
●
Handwheel made of GJL-200
●
Handwheel lockable
●
WSH limit switching device for signalling position and end positions
Options:
Primary reduction gearing
●
Type GZ as coaxial spur gear with various reduction ratios for reducing the input torques .
●
Combination with GK bevel gearbox directly on GS or on GS with GZ possible (90° deflection of input
shaft)
Primary reduction gearing
Valve attachment
Dimensions according to EN ISO 5211: The maximum torques of mounting flanges according to EN
ISO 5211 are to be met. Valve attachment
●
With spigot Standard:
●
With pilot bore
●
Worm gearbox can be mounted at 4 x 90° increments on coupling
Standard: Splined coupling for connection to
the valve shaft
Finish machining with bore and keyway, square bore or two-flat with grub screw for secure
fixing to valve shaft. Options:
Limit sensing for signalling position and end positions
●
WSG valve position indicator (hall sensors) for position and end position signalling to ensure precise
and low-backlash feedback for swing angles ranging between 82° and 98°.
●
WGD valve position indicator (counter gear mechanism) for position and end position signalling for
swing angles > 180°
Valve position indicators
29
GS 315 – GS 500
GZ 30.1 – GZ 40.1
Technical data