AUMA GP 10.1, Operation Instructions Manual, Page: 17 / 32

Features and functions
Available handwheel diameters according to EN 12570, selection according to output torque:
GP 16.1 GP 14.1 GP 10.1 Type
8:1 4:1 4:1 3:1 2.4:1 4:1 3:1 2.4:1 Reduction ratio
20 30 20 20/30 30 20 Input shaft
250
315 500
630
800 250
315
400 315
400
500 500
630
800 250
315
400 Handwheel Ø [mm]
GP 30.1 GP 25.1 Type
16:1 8:1 4:1 16:1 8:1 4:1 Reduction ratio
20 20/30 30 20 30 30 Input shaft
250
315
400 315
400
500 500
630
800 250
315
400 500
630
800 630
800 Handwheel Ø [mm]
Manual operation
●
Handwheel made of aluminium
●
Handwheel with ball handle
Standard:
●
Handwheel made of GJL-200
●
Handwheel lockable
Option:
B3 according to EN ISO 5210 (bore with parallel keyway) Valve attachment
Service conditions
Any position Mounting position
–60 °C to +80 °C Standard: Ambient temperature
0 °C to +140 °C (up to +150 °C for a short time with reduced lifetime) Options:
IP68-8, dust and water tight up to max. 8 m head of water Standard: Enclosure protection according to
EN 60529
IP68-20, dust-tight and water-tight up to max. 20 m head of water Option:
KN: Suitable for installation in industrial units, in water or power plants with a low pollutant
concentration Standard: Corrosion protection
KS: Suitable for use in areas with high salinity, almost permanent condensation, and high
pollution. Options:
KX: Suitable for use in areas with extremely high salinity, permanent condensation, and
high pollution.
Two-component iron-mica combination Paint
AUMA silver-grey (similar to RAL 7037) Standard: Colour
Available colours on request Option:
AUMA multi-turn gearboxes meet or even exceed the lifetime requirements of EN 15714-2. Detailed in-
formation can be provided on request. Lifetime
Cast iron Housing
Special features for use in potentially explosive atmospheres in accordance with ATEX 2014/34/EU
II 2G Ex h IIC T4 Gb Standard: Explosion protection in accordance
with ATEX 2014/34/EU
EN ISO 80079-36:2016-12
EN ISO 80079-37:2016-12 Applied standards
Restricted to manual operation, no motor operation permissible. Standard: Type of duty
–30 °C to +70 °C Standard: Ambient temperature
GP 10.1 – GP 16.1: 500 cycles
GP 25.1 – GP 30.1: 250 cycles
according to EN ISO 22109: 2020 Lifetime
17
GP 10.1 – GP 30.1
Technical data