AUMA GP 10.1, Operation Instructions Manual, Page: 16 / 32

7. Technical data
Information
The following tables include standard and optional features. For detailed information
on the customer-specific version, refer to the order-related data sheet. The technical
data sheet can be downloaded from the Internet in both German and English at ht-
tp://www.auma.com (please state the order number).
7.1. Technical data Multi-turn gearboxes
General information
Coaxial planetary gearing for motor or manual operation of valves (e.g. gate valves and globe valves).
Gearboxes Valve
Weight Input shaft Max. input
torques
Factor
1)
Reductionratio Gearboxes Valve attachment Max. valve
torque
[kg] [mm] [Nm]
Shaft diamet-
er
2)
[mm]
Flange accord-
ing to
EN ISO 5210
up to
[Nm]
6.0 20 46 2.2 2.4 : 1
GP 10.1 20 F10 100 6.0 20 37 2.7 3 : 1
6.0 20 28 3.6 4 : 1
6.0 30 185 2.2 2.4 : 1
GP 14.1 30 F14 400 6.0 20/30 148 2.7 3 : 1
6.0 20 111 3.6 4 : 1
19.5 30 194 3.6 4 : 1
GP 26.1 40 F16 700
19.5 20 97 7.2 8 : 1
55 30 333 3.6 4 : 1
GP 25.1 50 F25 1,200 55 30 167 7.2 8 : 1
65 20 83 14.4 16 : 1
63.5 40 694 3.6 4 : 1
GP 30.1 60 F30 2,500 63.5 30 347 7.2 8 : 1
75.5 30 174 14.4 16 : 1
Conversion factor from output torque to input torque to determine the actuator size 1)
Bore with keyway according to DIN 6885-1. 2)
Possible combinations with multi-turn actuators
Input mounting flange for mounting multi-turn actu-
ator
Suitable AUMA multi-turn actuator 1) Reduction ratio Gearboxes
DIN 3210 EN ISO 5210
G0 F10 SA 07.6 2.4 : 1
GP 10.1 G0 F10 SA 07.6 3 : 1
G0 F10 SA 07.2 4 : 1
G1/2 F14 SA 14.2 2.4 : 1
GP 14.1 G1/2 F14 SA 14.2 3 : 1
G0 F10 SA 10.2 4 : 1
G1/2 F14 SA 14.2 4 : 1
GP 16.1
G0 F10 SA 10.2 8 : 1
G1/2 F14 SA 14.6 4 : 1
GP 25.1 G1/2 F14 SA 14.2 8 : 1
G0 F10 SA 10.2 16 : 1
G3 F16 SA 16.2 4 : 1
GP 30.1 G1/2 F14 SA 14.6 8 : 1
G1/2 F14 SA 14.6 16 : 1
Standard flange according to EN ISO 5210 1)
Features and functions
●
Short-time duty S2 - 15 min (open-close duty)
●
Intermittent duty S4 - 25 % (modulating duty)
Type of duty
Clockwise rotation at input shaft results in clockwise rotation at output drive Direction of rotation
Input shaft with metallic surface protection, cylindrical with parallel key according to DIN 6885-1 Input shaft
●
Directly via electric multi-turn actuator
●
Input mounting flanges for mounting multi-turn actuators
Motor operation
16
GP 10.1 – GP 30.1
Technical data