Figure 31:
Groups
[1]
Startup menu
[2]
Status menu
[3]
Main menu
ID
Status menu and main menu are marked with an ID.
Figure 32:
Marking with ID
S
ID starts with
S
= status menu
M
ID starts with
M
= main menu
Group selection
It is possible to select between status menu
S
and main menu
M
:
For this, set selector switch to 0 (OFF), hold down push button C for approx. 2
seconds until a screen containing the ID
M...
appears.
Figure 33:
Select menu groups
You return to the status menu if:
●
the push buttons on the local controls have not been operated within 10 minutes
●
or by briefly pressing C
Direct display via ID
When entering the ID within the main menu, screens can be displayed directly (without
clicking through).
Figure 34:
Direct display (example)
Display indicates in the bottom row:
Go to
1.
Press push button
Go to
.
Display indicates:
Go to menu M0000
2.
Use push buttons
Up ▲ Down ▼
to select figures 0 to 9.
3.
Press push button
Ok
to confirm first digit.
4.
Repeat steps 2 and 3 for all further digits.
5.
To cancel the process: Press C
Esc
.
6.4
User level, password
User level
The user level defines which menu items or parameters can be displayed or modified
by the active user.
There are 6 different user levels. The user level is indicated in the top row:
31
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
ACExC 01.2 Intrusive Modbus RTU
Operation