Figure 57: Marking with ID
S
ID starts with
S
= status menu
M
ID starts with
M
= main menu
Group selection
It is possible to select between status menu
S
and main menu
M
:
For this, set selector switch to 0 (OFF), hold down push button C for approx. 2
seconds until a screen containing the ID
M...
appears.
Figure 58: Select menu groups
You return to the status menu if:
●
the push buttons on the local controls have not been operated within 10 minutes
●
or by briefly pressing C
Direct display via ID
When entering the ID within the main menu, screens can be displayed directly (without
clicking through).
Figure 59: Direct display (example)
Display indicates in the bottom row:
Go to
1.
Press push button
Go to
.
Display indicates:
Go to menu M0000
2.
Use push buttons
Up ▲ Down ▼
to select figures 0 to 9.
3.
Press push button
Ok
to confirm first digit.
4.
Repeat steps 2 and 3 for all further digits.
5.
To cancel the process: Press C
Esc
.
6.4.
User level, password
User level
The user level defines which menu items or parameters can be displayed or modified
by the active user.
There are 6 different user levels. The user level is indicated in the top row:
Figure 60: User level display (example)
Password
A password must be entered to allow parameter modification. The display indicates:
Password 0***
A specific password is assigned to each user level and permits different actions.
52
SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1
Operation
ACExC 01.2
