48
User Manual smar-tel-i
Progr
am
ming
With the use of disabled numbers, telephone numbers can be blocked, preventing them
from being called. smar-tel-i accepts up to nine blocked numbers with a maximum of five
digits. For example, calling foreign numbers or information can be prevented by disabling
the numbers “00“ for foreign calls or “0190“ for information.
Example: Block (disable) the dialing of all telephone numbers beginning with the
number “0190“.
h
A blocked number can not be entered if it is already being used as a special emer-
gency number or as a direct call telephone number.
In order to change a blocked number, that entry must be deleted and the new entry
must be input.
The blocked number that has been entered can be seen using the I
NFORMATION
menu-group (refer to page 32).
When operating a PBX, the exchange line access code must also be entered in
some instances You can determine whether this is necessary in your case by reading
the chapter Alternatives for Initiating Exchange Line Access on page 35. Please
observe in this regard that a telephone number can also be dialed with the private or
targeted exchange access.
Be aware that a blocked number can be dialed using a private provider (for example, a
telephone number beginning with “010...“). Therefore, these numbers should be blok-
ked as well.
In addition to the nine blocked numbers of your telephone, the 10 blocked numbers of
your AUERSWALD PBX can also be used (refer to the PBX user manual).
Be aware that an unabled number entered in the AUERSWALD PBX has no influ-
ence over the nine blocked numbers in smar-tel-i.
5. 6. 2
Blocked (Disabled) Numbers
Search for the function under the menu-group
SETTINGS
(refer to page 31).
change
A
The current number of existing blocked num-
bers is shown.
Open the menu.
ok
rA
Enter a four digit PIN (“0000“ Factory default
setting) and confirm.
(Inputting Numbers: refer to page 32).
r
Enter the first blocked number (a maximum of
five digits).
(Inputting numbers: refer to page 32).
ok
A
Store the blocked numbers.
Restricted Numbers 0
change next
PIN Input: _
ok
Restr.-No1: _
ok del
Restr.-No1: 0190_
ok lösch