User Manual smar-tel-i
15
Op
e
ra
ti
o
n
The last 10 telephone numbers that were dialed are stored in the redialing memory.
Example: After picking up the receiver, recall from the redialing memory the tele-
phone number of “Klaus“ which was previously dialed from the telephone book.
h
If the redialing key is pressed before picking up the receiver (dialing preparation),
then telephone numbers may be altered or entire entries may be deleted.
The target dialing or macro keys
_
-
}
can be programmed with any telephone numbers
(target dial telephone numbers) or other useful functions (refer to the chapter Programming
Macro Keys on page 67). In order to dial a telephone number stored on a target dialing key,
simply pressing the key once is sufficient.
After picking up the receiver, dial with the target dial key
_
.
h
If the target dial key is pressed prior to picking up the receiver (dialing prepara-
tion), your entry can still be corrected. Pressing the soft-key under “OK“ allows the dis-
played number to be corrected without permanently altering the programming.
4. 2. 3
Using Redialing
b
w
Display the telephone number last called.
w
Press the key repeatedly until the desired
entry has been selected.
Dial
A
Dial the telephone number to be called.
(Pressing the soft-key under “->“ displays the
telephone number of “Klaus“.)
4. 2. 4
Using Target Dialing Keys
b
_
Press the target dial key.
The telephone number to be called is dialed.
Dial: 3:--3-----
End < > 4:-2-----8
1: 008154711
Dial
3: Klaus
Dial ->
Dial: 3:--3-----
End < > 4:-2-----8
Dial: 008154711_
End
