978
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Administration
Configuration VoIP
RTP
Unité centrale
The RTP port is a port on the local system that is used as the outgoing port
for RTP transfers.
Note:
The page
Synthèses > Ports
shows an overview of the PBX ports
(incoming and outgoing).
QUALITY OF SERVICE (QOS)
ServDiff
Requirements:
•
Existing and enabled DiffServ support on all active network components
DiffServ is used to prioritise the handling of language packages (VoIP) and
to achieve better voice quality for VoIP calls. DiffServ can be evaluated in
networks that include active network components, such as routers or
switches, to enable packets to be forwarded in accordance with their priority.
As proposed in RFC 4594, the DSCP values are set for VoIP calls
(signalling (SIP): CS5, voice (RTP): EF).
Notes:
DiffServ is not usually supported by VoIP providers. As a result, this
setting may not be taken into consideration under certain circumstances
on the Internet.
