COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
745
Settings – Périphériques
Interphones
The ringtone specifies which sequence of sounds is used to signal door calls
to internal subscribers on the PBX.
Note:
See the Functions, Uses, Concepts > Ring tones section for infor-
mation about exceptions to signalling and sound sequences.
Durée de l’appel
Proceed as follows:
•
Separately for configurations
Select a call duration during which a door call is to be signalled to an internal
subscriber.
Note:
Set the call duration in the connected door terminal to the
maximum call duration. The actual call duration will then be limited by
the PBx.
Choix de ligne/Présentation du numéro de téléphone DDI
Proceed as follows:
•
Separately for configurations
