642
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Groupes
Profils
Paramètres de base
Schéma de sonnerie après
Tous
All subscribers logged-in to the group will ring simultaneously. Selected
subscribers will start to ring after the configured delay time (
après
). If a call
was not accepted, although all logged-in members of the group were called,
the call would be finished with a busy signal.
Tous - groupe fractionné
The call is handled almost similar to the ringing sequence
Tous
. The only
difference is the way multiple calls to the group are handled: If the group
receives further calls during an active call, the group will be split into several
smaller groups ringing for a specific active call. But there will never ring
more calls in the group than the number of free available group members.
Additional calls will be rejected with a busy then. If a call is accepted the
other phones ringing so far for this call are assigned to the other pending
calls and will immediately start to ring again. If a group member finishes a
call, this subscriber will immediately ring again for the pending calls. The
timer for the configured delay time (
après
) starts after receiving the first call
to the group and will not restart for additional incoming calls.
Linéaire - fixe - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (
après
) another single group member will be called. The order of calls
depends on the configured
Priorité
. If a call was not accepted, although all
logged-in members of the group were called, the call would be finished with
a busy signal.
Linéaire - compensé - groupe fractionné
Only the phone of one group member will ring. After the configured delay
time (
après
) another single group member will be called. The order of the
calls depends on the configured
Priorité
: First of all the member of the
group first logged-in gets the position 1 in the order of calls, the second one
